doubledoublepokerstrategy|科鲁兹使用手动钥匙如何开锁？
The Chevrolet Cruz as an economical compact carDoubledoublepokerstrategyIt has always been loved by consumers. Recently, some netizens asked how to use a manual key to open Cruz's car door. BelowDoubledoublepokerstrategyI will describe in detail the steps that Cruz uses a manual key to unlock.
First, we need to find Cruz's door keyhole. Cruz's door lock hole is located below the door handle and is shaped as a small cylindrical hole with a diameter of about 5 mm. Above the keyhole, there is a small key slot for inserting manual keys.
The steps to open the door are as follows:
Find the door keyhole: under the door handle of Cruz, find the small cylindrical hole on the edge of the door, which is the door keyhole. Insert manual key: insert the manual key into the door lock hole, and the serrated part of the key is aligned with the notch of the lock hole. Rotate the key: rotate the key clockwise until you feel that the key has been fully rotated once. By this time, the door lock had been unlocked. Try to open the door: gently pull the door handle, the door should open smoothly.It should be noted that if you feel too much resistance when rotating the key, it may be due to dirt or rust inside the keyhole. At this time, do not forcibly turn the key so as not to damage the keyhole. You can clean the inside of the lock hole with a cleaning agent before you try to unlock it.
In addition, Cruz's trunk can also be opened with a manual key. The trunk lock hole is located at the edge of the trunk cover and is similar in shape to the front door lock hole. The steps to open the trunk are the same as the front door, just insert the manual key into the lock hole and rotate to the open state.
In addition to opening the door and trunk, Cruz's manual key can also be used to open the fuel tank cap. The keyhole in the fuel tank cover is located on the right side of the vehicle, near the rear wheel. The procedure for opening the tank cap with a manual key is the same as opening the door and trunk, just find the keyhole, insert the key, and rotate it.
In short, the Chevrolet Cruz using a manual key to unlock the lock is very simple, just follow the correct steps. Of course, if you encounter any problems in the process of use, it is recommended to contact professional car maintenance personnel for inspection and maintenance.
The following is a brief summary of the locks opened by Cruz manual keys in different parts:
Place lock hole position open step insert key under door handle, rotate clockwise, pull door trunk trunk cover edge insert key, rotate clockwise, open trunk cover fuel tank cover right side of vehicle, insert key near rear wheel, rotate clockwise, open fuel tank coverThe above is a detailed introduction of Cruz using a manual key to open the lock. I hope it will be helpful to you.
2024-05-07 11:05:01
目录 返回
首页